Gigabyte GA-7ZXR User Manual page 65

Creating Arrays Automatically
The Auto Setup <1> selection from the Main Menu can intuitively help create your disk array. It
will assign all available drives appropriate for the disk array you are creating. After making all
selections, use Ctrl-Y to Save selections. FastBuild will automatically build the array.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Optimize Array for:
Typical Application usage:
Mode.................................................Stripe
Spare Drive Count....................................0
Drives used in Array.................................2
Array Disk Capacity.......................... 16126
[ ] Up [ ] Down [ ,
Optimize Array For
Select whether you want Performance (RAID 0), Security (RAID 1) under the "Optimize Array
for" setting.
Performance (RAID 0 Striping)
Supports the maximum performance. The storage capacity equals the number of drives
times the capacity of the smallest drive in the disk array.
NOTE: This motherboard permits striped arrays using 1, 2 drive attached in Auto Setup
mode.
Security (RAID 1 Mirroring)
Creates a mirrored (or fault tolerant) array for data security.
NOTE: Under the Security setting, This motherboard permits two drives to be used for a
single Mirrored array only.
[Auto Setup Options Menu]
Performance
A/V Editing
[ Auto Setup Configuration ]
[ Keys Available ]
, Space] Change Option
58
RAID Introduction
[ESC] Exit [Ctrl-Y] Save