JVC GZ-E565 User Manual page 226

Using Wi-Fi by Creating a QR Code (GZ-EX575/GZ-EX555/GZ-EX515)
8
Activate WPS of the access point (wireless LAN router) within 2 minutes.
To activate WPS, refer to the instruction manual of the device in use.
0
9
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
Search the access point, and select from the list.
o
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
226
5
Tap "ACCESS POINTS".
(Operation on this camera)
6
Tap "ADD".
(Operation on this camera)
7
Tap "SEARCH".
(Operation on this camera)
The search results appear on the camera's screen.
0
8
Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
9
Register a password.
(Operation on this camera)
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.