Tv Monitoring - JVC GZ-E565 User Manual

Using Wi-Fi by Creating a QR Code (GZ-EX575/GZ-EX555/GZ-EX515)
You can allow the recording to be performed for 15 seconds or press
0
the START/STOP button to stop.
9
Tap "SEND".
Sending of the video mail starts.
0
To check the file, tap "PLAY TO CHECK".
0
When it is complete, tap "OK".
0
Check the incoming e-mail.
224

TV MONITORING

Setting (Once setting is done, start from the "Regular
o
Operation" below)
Create a QR code.
Enter values in the required items for the TV monitor.
o
MAC address filter: set to "ON" if monitoring images with a specific TV
0
device.
Add the MAC address: register the physical address when monitoring
0
images with a specific TV device. (Up to 8 addresses can be registered)
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
5
Tap "SET FROM QR CODE".