Power Button With Optional Fingerprint Reader; Removing The Power Button With Optional Fingerprint Reader - Dell Inspiron 16 Plus 7620 Service Manual

Steps
1. Place the power-button board on the palm-rest and keyboard assembly.
2. Align the screw holes of the power-button board with the screw holes on the palm-rest and keyboard assembly.
3. Replace the screw (M2x3) that secures the power-button board to the palm-rest and keyboard assembly.
4. Connect the power-button board cable to the system board and close the latch.
Next steps
1. Install the heat sink.
2. Install the left fan
3. Install the base cover.
4. Follow the procedure in

Power button with optional fingerprint reader

Removing the power button with optional fingerprint reader

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the base cover.
3. Remove the left fan.
4. Remove the heat sink.
5. Remove the power-button
42 Removing and installing components
After working inside your
Before working inside your
board.
computer.
computer.
Before working inside your