Steps
1. Using the alignment posts, place the speakers (tweeters) on the palm-rest and keyboard assembly.
NOTE:
Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
2. Connect the speaker (tweeters) cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Power-button board
Removing the power-button board
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
3. Remove the
left
fan.
4. Remove the
heat
sink.
About this task
The following image(s) indicate the location of the power-button board and provides a visual representation of the removal
procedure.
40
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Before working inside your