Advertisement
HOW TO CHANGE VARIOUS SETTINGS
You can change the functions listed in the table below.
1.
Turn the Main Unit power OFF.
2.
♪
3.
Select "Function number".
Reverse
♪
Set
Light Control
You can select the brightness of the Front Display
and Cleanliness Monitor.
Auto Restart
If the Main Unit is unplugged or if there is a power
failure, the Main Unit will resume operation with
the previous settings after power is restored.
Adjusting Sensor Sensitivity (F3 - F5)
Light Sensor
Dust(sensitive) Sensor
Odor Sensor
* When set to "Turn off", the "Darker" light illuminates for 8 seconds after operation starts and then the light turns off.
FX-J80J_2nd.indd
FX-J80J_2nd.indd
11
11
more 3 sec.
Forward
♪
or
････
♪
Function
4.
Select "Setting number".
Reverse
♪
Set
5.
Press Power ON/OFF Button to
finish the setting.
♪
～
Setting
Turn off *
Darker
Auto
(default)
Light automatically switches ON or OFF based on
room brightness.
Room is bright : light is ON
Room is dark : light is OFF
Cancellation
ON
(default)
Low
Standard
(default)
High
11
Forward
♪
or
♪
～
Turn off
2022/04/22
2022/04/22
11:05:37
11:05:37
Advertisement
