Remote Controller - Fujitsu AUG12LVLB Design & Technical Manual

2.

REMOTE CONTROLLER

WIRELESS REMOTE CONTROLLER
FEATURES
Simple function setting
Setting of the air conditioner selection function is performed by remote controller.
Built-in timers
Select from four different timer programs (ON / OFF / PROGRAM / SLEEP).
Program timer
The program timer operates the on and off timer once within a 24 hour period.
Sleep timer
The sleep timer function automatically corrects the temperature thermostat setting according to
the time setting to prevent excessive cooling and heating while sleeping.
Cooling operation/dry operation
When the sleep timer is set, the set temperature
automatically rises 1 °C every hour. The set
temperature can rise up to a maximum of 2 °C.
Timer setting
60min.
Switching remote controller signal code
Mixed-up
I.U. I.U. I.U. I.U.
Code selector switch eliminates unit
•
being wrongly switched.
(Up to 4 codes can be set.)
*I.U.=Indoor unit
4 mode timer setup available (ON / OFF / PROGRAM / SLEEP)
Easy operation.
Easy to change signal code (max. 4 units) by button operation.
2 °C
1 °C
After code change
A B C D
I.U. I.U. I.U. I.U.
A B C D
- (01 - 03) -
Heating operation
When the sleep timer is set, the set temperature
automatically drops 1 °C every 30 minutes. The
set temperature can drop to a maximum of 4 °C.
1 °C
2 °C
30min.
60min.
90min.
Timer setting
3 °C
4 °C