Table of Contents
Advertisement
The defrosting process:
•
Unplug the device before defrosting.
•
Take the products out of the camera, wrap them in paper and
store them in a cold place.
•
Leave the device doors open.
•
Remove the internal plug at the bottom of the chest freezer and
allow the ice to melt.
•
Place a water collecting container under the drain pipe, take out the
plastic plug on the back of the chest freezer.
•
Make sure that the ice inside the chest freezer has melted. Wipe
the inside and outside of the chest freezer and its components
with a soft dry cloth. If they are too dirty, wipe them with a cloth
moistened with a detergent, then wipe dry with a soft clean cloth.
•
Reinstall the outer and inner plugs.
•
Close the doors, plug the device into the mains, load the device
after 1.5 hours.
To avoid damage to the device DO NOT use hot water,
sharp objects or electric heaters when defrosting.
Do not use bleaching agents or solvents to clean the chest
freezer (especially cleaning agents containing chlorine and
abrasives).
14
Advertisement
Table of Contents
