Gigabyte GA-7VRX User Manual page 78

GA-7VRX/GA-7VRXP Motherboard
Using FastBuild TM Configuration Utility
The FastBuild Configuration Utility offers several menu choices to create and manage the drive
TM
array on the motherboard. For purposes of this manual, it is assumed you have already created an
array in the previous chapter and now wish to make a change to the array or view other options.
Viewing BIOS Screen
When you boot your system with the RAID function and drives installed, the FastBuild BIOS will
detect the drives attached and show the following screen.
FastTrak100 (tm)"Lite" BIOS Version 1.xx (Build xx)
(c) 1995-2001 P romise T echnology, Inc. All Rights Reserved.
Scanning IDE drives . . . . .
If an array exists already, the BIOS will display the following screen showing the board RAID BIOS
version and status of the array.
FastTrak100 (tm) "Lite"BIOS Version 1.xx (Build xxxx)
(c) 1995-2001 P romise T echnology, Inc. All Rights Reserved.
ID MODE SIZE
1 * 1*2 Mirror
Press <Ctrl-F> to enter FastBuild (tm) Utility....
The array status consists of three possible conditions: Functional, Critical, Offline.
Functional - The array is operational.
Critical - A mirrored array contains a drive that has failed or disconnected. The remaining drive
member in the array is functional. H owever, the array has temporarily lost its ability to provide fault
tolerance. The user should identify the failed drive through the FastBuildO Setup utility, and then
replace the problem drive.
Offline - A striped array has 1 drive that has failed or been disconnected. When the array condition is
"offline," the user must replace the failed drive(s), then restore data from a backup source.
TRACK-MAPPING
16126M 611/128/32
78
ST ATUS
Functional