Password Check - Gigabyte GA-7VRX User Manual

?S.M.A.R.T. for Hard Disks
Enable HDD S.M.A.R.T. Capability.
?Enabled
Disable HDD S.M.A.R.T. Capability. (Default value)
?Disabled
?Interrupt Mode
Through IOAPIC generate more IRQ for system use.(Default value)
?APIC
Use AT stantard IRQ controlles to generate IRQ.
?PIC
When you already have I OAPIC enable system and want to upgrade the system please note, since
running an IOAPIC enabled OS (like Windows NT ,Windows 2000, Windows XP...) system with none
IOAPIC HW support will cause the system to hang. Following are some situations users might run into:
1.An IOAPI C enabled OS and change the BIOS setting from IOAPIC to PIC, this will cause your
system to hang.
?Boot Up Num-Lock
Keypad is number keys. (Default value)
?On
Keypad is arrow keys.
?Off
?Floppy Drive Seek
During POST, BIOS will determi n e the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40
tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
?Enabled
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are all
80tracks.
BIOS will not search for the type of floppy disk drive by track number. Note
?Disabled
that there will not be any warning message if the drive installed is 360 K.
(Default value)

?Password Check

Please refer to the detail on P.53
The user must enter correct password in order to access the system and/or
?Always
BIOS Setup.
The user must enter correct password in order to access BIOS setup utility.
?Setup
(Default Value)
33
BIOS Setup