Gigabyte GA-7DX User Manual page 72

7DX Motherboard
System After AC Back
Last State System power on depends on the status before AC is lost.
Off Always in Off state when AC power returns. (Default value)
On Always power on the system when AC power returns.
PME Event Wake Up
Disabled Disable PME Event Wake Up.
Enabled Enable PME Event Wake Up. (Default Value)
USB Dev Wakeup from S3-S5
Enabled Enable USB Device Wakeup from ACPI S3, S4 and S5 mode.
Disabled Disable USB Device Wakeup from ACPI S3, S4 and S5 mode.
(Default Value)
ModemRingOn/WakeOnLan
Disabled Disable ModemRingOn/WakeOnLan with #RI.
Enabled Enable ModemRingOn/WakeOnLan with #RI. (Default Value)
MODEM Use IRQ
NA Set MODEM Use IRQ to NA.
3 Set MODEM Use IRQ to 3. (Default value)
4 Set MODEM Use IRQ to 4.
5 Set MODEM Use IRQ to 5.
7 Set MODEM Use IRQ to 7.
9 Set MODEM Use IRQ to 9.
10 Set MODEM Use IRQ to 10.
11 Set MODEM Use IRQ to 11.
Resume by RTC Alarm
You can set "Resume by RTC Alarm" item to Enabled and key in date/time to power on
system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system or wake up system from
sleep mode.
65