Gigabyte GA-7DX User Manual page 64

7DX Motherboard
DRAM Trc Timing Value
This function specify the minimum time from activate to activate of the same bank.
3 Cycle Set DRAM Trc Timing Value to 3 Cycle.
4 Cycle Set DRAM Trc Timing Value to 4 Cycle.
5 Cycle Set DRAM Trc Timing Value to 5 Cycle.
6 Cycle Set DRAM Trc Timing Value to 6 Cycle.
7 Cycle Set DRAM Trc Timing Value to 7 Cycle.
8 Cycle Set DRAM Trc Timing Value to 8 Cycle.
9 Cycle Set DRAM Trc Timing Value to 9 Cycle.
10 Cycle Set DRAM Trc Timing Value to 10 Cycle.
DRAM Trp Timing Value
This function specify the delay from precharge command to activate command.
1 Cycle Set DRAM Trp Timing Value to 1 Cycle.
2 Cycle Set DRAM Trp Timing Value to 2 Cycle.
3 Cycle Set DRAM Trp Timing Value to 3 Cycle.
4 Cycle Set DRAM Trp Timing Value to 4 Cycle.
DRAM Tras Timing Value
This function specifies the minimum bank (active time: time from active to precharge of
same bank).
2 Cycle Set DRAM Tras Timing Value to 2 Cycle.
3 Cycle Set DRAM Tras Timing Value to 3 Cycle.
4 Cycle Set DRAM Tras Timing Value to 4 Cycle.
5 Cycle Set DRAM Tras Timing Value to 5 Cycle.
6 Cycle Set DRAM Tras Timing Value to 6 Cycle.
7 Cycle Set DRAM Tras Timing Value to 7 Cycle.
8 Cycle Set DRAM Tras Timing Value to 8 Cycle.
9 Cycle Set DRAM Tras Timing Value to 9 Cycle.
DRAM CAS Latency
This function specify the DRAM CAS Latency.
2 Cycle Set DRAM CAS Latency to 2 Cycle.
2.5 Cycle Set DRAM CAS Latency to 2.5 Cycle.
57