Gigabyte GA-7DX User Manual page 34

7DX Motherboard
Step 2:
(If you want to use STR Function, please set jumper J18 Closed.)
Step 3:
Power on the computer and as soon as memory counting starts, press <Del>. You will enter
BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "
Type
: S3 (STR)". Remember to save the settings by pressing "ESC" and choose the "SAVE
& EXIT SETUP" option.
Congratulation! You have completed the installation and now can use the STR function.
1
Pin No. Definition
Open STR Disable
Close STR Enable (Default)
27
ACPI Sleep