Gigabyte GA-7DX User Manual page 61

First / Second / Third Boot device
Floppy Set your boot device priority to Floppy.
LS120 Set your boot device priority to LS120.
IDE-0~3 Set your boot device priority to IDE-0~3.
SCSI Set your boot device priority to SCSI.
CDROM Set your boot device priority to CDROM.
ZIP Set your boot device priority to ZIP.
Disabled Disable this function.
LAN Set your boot device priority to LAN.
Floppy Drive Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360
type is 40 tracks while 720, 1.2 and 1.44 are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine if it is 40 or 80
tracks. Note that BIOS can not differentiate between 720, 1.2 or 1.44
drive type as they are all 80 tracks.
Disabled BIOS will not search for the type of floppy disk drive by track number.
Note that there will not be any warning message if the drive installed
is 360. (Default Value)
BootUp Num-Lock
On Keypad is number keys. (Default value)
Off Keypad is arrow keys.
Password Check
This category allows you to limit access to the system and Setup, or just to Setup.
System The user must enter correct password in order to access the system
and/or BIOS Setup.
Setup The user must enter correct password in order to access the system.
(Default value)
HDD S.M.A.R.T. Capability
Enabled Enable HDD S.M.A.R.T. Capability.
Disabled Disable HDD S.M.A.R.T. Capability. (Default value)
54
BIOS Setup