Monte Carlo Fan Company AC-552 Owner's Manual And Installation Manual
5tq52xxd-l series
Hide thumbs
Also See for AC-552:
- Owner's manual and installation manual (10 pages) ,
- Manual (8 pages) ,
- Owner's manual and installation manual (10 pages)
Advertisement
Quick Links
Owner's Guide and Installation Manual
5TQ52XXD-L Series Fan
UL Model No. : AC-552
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
10.1 kgs
22.22 lbs
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company AC-552
Summary of Contents for Monte Carlo Fan Company AC-552
- Page 1 Owner’s Guide and Installation Manual 5TQ52XXD-L Series Fan UL Model No. : AC-552 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 10.1 kgs...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 5/5/2012...
- Page 3 Next, insert clevis pin through y oke Tighten both yoke set screws to fur - they are present. and downrod and secure with cotter ther secure downrod. pin. (see inset) © 2011 Monte Carlo Fan Company 5/5/2012...
- Page 4 3 screws previously loosened onto the bottom shaft of the fan and securely. turning with your other hand to your the blade arm screws and w ashers desired position. See page 7 for provided. example. © 2011 Monte Carlo Fan Company 5/5/2012...
- Page 5 Remove the plastic insert from 4 screw holes and installing the 4 until the threaded rod is completely the center of the switch cap . screws removed and saved from ear- through. lier step. Tighten screws securely. © 2011 Monte Carlo Fan Company 5/5/2012...
- Page 6 Save for later use. Replace bulbs with the correct wattage place and tighten in direction of bulbs, turn the power on. arrow. © 2011 Monte Carlo Fan Company 5/5/2012...
- Page 7 Align the hole in glass with hole in final cap to allow the fan speed con- trol pull chain to pass through. Install finial and tighten in direction of arrow. © 2011 Monte Carlo Fan Company 5/5/2012...
-
Page 8: Troubleshooting
Reset the lights by turning off the wall switch, breaker,or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. CAUTION: Make sure main power is turned off before entering switch housing. © 2011 Monte Carlo Fan Company 5/5/2012... - Page 9 Jul.2013 Update for CUL regulation...