Table of Contents
Advertisement
Settings > General
Language
Sets the menu screen to the desired language.
SMART ENERGY
High
SAVING
Low
Off
Power LED
On
Off
Automatic Standby
Feature that automatically turns off the monitor when there is no movement on the screen for a period
of time. You can set a timer for the auto-off function. (8 H, 6 H, 4 H, and Off)
DisplayPort 1.2
Enable or Disable DisplayPort 1.2.
y
HDMI Compatibility
On
Mode
Off
y
Buzzer
This feature lets you set the sound generated from Buzzer when your monitor powers on.
On
Off
OSD Lock
This feature disables the configuration and adjustment of menus.
On
Off
y
Information
The display information will be shown the Serial Number, Total Power On Time, Resolution.
Reset to Initial Settings Do you want to reset your settings?
Yes
No
NOTE
The value of energy saving data may differ depending on panel and panel suppliers.
y
If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on
y
source.
Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Disables the SMART ENERGY SAVING feature.
The power LED turns on.
The power LED turns off.
NOTE
Be sure to configure this option according to the DisplayPort version supported by your graphics
card. Set this option to Disable if your graphics card does not support DisplayPort 1.2.
Enables HDMI Compatibility Mode.
Disables HDMI Compatibility Mode.
NOTE
If the connected device does not support HDMI Compatibility Mode, the screen or sound may not
work properly.
Enables your monitor's Buzzer.
Disables your monitor's Buzzer.
Enables OSD Lock.
Disables OSD Lock.
NOTE
All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock, Information.
Returns to the default settings.
Cancel the select.
Description
21
User Settings
Advertisement
Table of Contents
