Installing Onto A Table - LG 34BL650-B.AUB Owner's Manual

10
ASSEMBLING AND PREPARING
CAUTION
Illustrations in this document represent typical
y
procedures, so they may look different from the
actual product.
Do not carry the monitor upside down by just
y
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
y
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
Do not apply foreign substances (oils, lubricants,
y
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
Applying excessive force when tightening screws
y
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
NOTE
You can disassemble the stand in the reverse
y
order of the assembly.

Installing onto a table

1
Lift the monitor and place it on the table in an up-
right position.
Place at least 100 mm (3.94 inches) away from the
wall to ensure sufficient ventilation.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
2
Connect the Power cord to the monitor, then plug
the power cord into the wall outlet.
or
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or install-
y
ing the monitor. There is risk of electric shock.
100 mm
(3.94 inches)
100 mm
(3.94 inches)