Warranty Information - Jet MAXI D125 Operation & Maintenance Manual

Warranty Details
Warranty - What Is Covered?
The Wolseley warranty on equipment supplied to distribution and OEM covers manufacturing defects, under
our standard terms and conditions of sale.
If the unit is identified with a manufacturing defect then no charge is made for correcting the defect.
The JET equipment is manufactured to order and is clearly marked, where applicable, with a unique serial
number, allowing traceability to both individual model configuration and the engineer or site responsible for the
build and test.
Warranty - What Is Not Covered?
If a defect or problem has arisen as a direct result of the connected system, misuse, incorrect handling,
incorrect installation or incorrect commissioning then any service visit is chargeable.
If a defect is identified as a manufacturing defect it will be addressed as described above, additional remedial
works as a result of misuse, incorrect handling, incorrect installation or incorrect commissioning then the
additional work is chargeable.
Installation costs and/or consequential losses are not covered by this agreement.
Conditions of warranty
DOS - Date Of Supply
DOC - Date Of Commissioning
Equipment
JET Pressurisation Equipment That there is an appropriate safety valve on the system
Contact Details
For further information please visit the following Website at the following URL:
www.pipecenter.co.uk
We reserve the right to change designs and technical specifications of our products
Conditions
protecting the equipment. That the equipment is undamaged
at the time of installation. That the equipment is not exposed
to adverse environmental conditions. That the equipment is
stored and installed in a frost free area. That the operating
and maintenance instructions are followed. That the
equipment is used for the purpose for which it was designed.
www.wolseley.co.uk
.
Timescale
18 months DOS
24 months DOC
Rev 8.1 Oct-15 Page 40 / 42