Controller Programming - Jet MAXI D125 Operation & Maintenance Manual

Controller Programming

Do not alter any settings without first understanding the implications of doing so. Incorrect
settings may cause damage to the equipment, system or property.
To enter the programming menu, hold the (+) button until "enter code" appears on the screen, followed by
"0000" with a flashing cursor after the first digit.
To gain access to the programming menu, one of the following codes must be entered:
To enter the code, change the first digit with the (+) and (-) buttons, then press (SET) to move onto the next
digit. Repeat for all digits, then once the correct code is shown on the display, press (SET) to enter the
programming menu.
Once a correct code has been entered, the first option [COLD FILL] will appear on the screen.
Once in the menu, the value of the current menu item can be changed using the (+) and (-) buttons. Once the
current value has been set, pressing the (SET) button will move on to the next option.
It is not possible to navigate backwards through the menu. To return to a previous setting in the
menu, press the (SET) button repeatedly to scroll through to the end of the menu, and then re-
enter the appropriate code.
If the controller looses power while in the programming menu, all changes made will be erased.
To confirm all changes, the end of the menu must be reached, and the "SAVING..." message must
be displayed.
We reserve the right to change designs and technical specifications of our products
Customer Code
Engineer Code (≥V6.3)
www.wolseley.co.uk
Standard set of options
Extended set of options
.
2601
4706
Rev 8.1 Oct-15 Page 16 / 42