Standard Cmos Features - Gigabyte 7VT880-RZ User Manual

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
Drive A
Drive B
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
Total Memory
: Move Enter: Select
F5: Previous Values
Date
The date format is <week>, <month>, <day>, <year>.
Week From Sun. to Sat., determined by the BIOS and for display only.
Month From Jan. to Dec.
Day From 1st to 31st (or the maximum allowed in the month).
Year From Year 1999 to 2098.
Time
The format used to express time is hours:minutes:seconds. The time is calculated based on the
24-hour military-time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave
IDE HDD Auto-Detection
IDE Channel0/Channel 1 Master(Slave) setup
Auto Allows BIOS to automatically detect IDE devices during POST. (Default value)
None Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
Manual User can manually input the correct settings
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto (Default:Auto)
IDE Channel 2 Master/ IDE Channel 3 Master
IDE HDD Auto-Detection
Extended IDE Drive setup
Auto Allows BIOS to automatically detect IDE devices during POST. (Default value)
None Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
Access Mode Use this to set the access mode for the hard drive. The two options are:
Large/Auto (Default:Auto)
Capacity Capacity of currently installed hard disk.
Standard CMOS Features
Fri, Jan 9 2004
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[None]
[Disabled]
[All, But Keyboard]
640K
127M
128M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Press "Enter" to select this option for automatic device detection.
You can use one of the three methods below:
Press "Enter" to select this option for automatic device detection.
You can use one of the two methods below:
- 25 -
Item Help
Menu Level
Change the day, month,
year
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
<Day>
1 to 31 (or maximum
allowed in the month)
<Year>
1999 to 2098
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup