Advanced Chipset Features - Gigabyte 7NF-RZ-C User Manual

Advanced Chipset Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
System Performance
FSB Frequency
x Memory Frequency
Resulting Frequency
AGP Frequency
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power End-User use only!
System Performance
Normal
Turbo
Manual
FSB Frequency
100MHz
133MHz
166MHz
200MHz
Memory Frequency
By SPD
50% ~ 200%
Auto
Resulting Frequency
The value depends on FSB/Memory Frequency settings.
AGP Frequency
Normal
50MHz ~ 100MHz Set AGP frequency manually.
Please follow the instructions below to enable the support for DDR 400 memory modules :
(You have to set System Performance to Manual).
1) If you use a processor with FSB100MHz (make sure FSB Frequency is set to 100MHz), set Memory Frequency to 200%.
2) If you use a processor with FSB133MHz (make sure FSB Frequency is set to 133MHz), set Memory Frequency to 150%.
3) If you use a processor with FSB166MHz (make sure FSB Frequency is set to 166MHz), set Memory Frequency to 120%.
4) If you use a processor with FSB200MHz (make sure FSB Frequency is set to 200MHz), set Memory Frequency to 100%.
7NF-RZ Series Motherboard
Advanced Chipset Features
[Normal]
[133MHz]
By SPD
266MHz
[Normal]
+/-/PU/PD: Value
F6: Fail-Save Default
Set system at the most stable settings. (Default value)
Use overclock settings for higher performance but with higher risk of
instability.
Allows full customization of performance options.
Set FSB frequency at 100MHz.
Set FSB frequency at 133MHz. (Default value)
Set FSB frequency at 166MHz.
Set FSB frequency at 200MHz.
Set memory frequency by SPD. (Default value)
Set memory frequency manually.
Set the best memory frequency for system.
Set the best AGP frequency for system. (Default value)
- 24 -
Item Help
Menu Level
[Normal]
Use the most stable settings
[Turbo]
Use over clocked settings for
higher performance but with
higher risk of instability
[Manual]
Allows full customization of
performance options
Advanced users only
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help