Advertisement
Lamp replacement (Continued)
Notes
• The projector displays the total working time at
every 1,000 hours (only when plugged in and
turned on).
• The lamp should be replaced if the total
working time exceeds about 2,000 hours.
• Attach the lamp cover firmly after replacing the
lamp. If it is not set correctly, the power will not
turn on.
• Use a new lamp when replacing it.
• The lamp is made of glass and is very fragile.
Do not touch the lamp with your bare hands
and do not jolt or damage it. Do not use an
exhausted lamp.
5
6
!
7
Reset the lamp timer.
Refer to the lamp instructions for resetting.
Load a new lamp.
Slide until it hits the bottom and tighten the
two fixed screws.
Attach the lamp cover.
Slide the cover in place and tighten two
screws.
CONTENTS
58
Advertisement
