Connecting Your Device Via Wps - D-Link DAP-1325 User Manual

Section 3 - Configuration
After clicking the Next button from the previous step, the DAP-1325/DAP-1330
will automatically initiate a WPS-PBC (Wireless Protected Setup - Push Button
Control) search to find an uplink network to extend. If your existing wireless
networking device has a physical or virtual WPS button, press or enable it within
the 120 seconds allotted by the countdown timer.
If you do not wish to use WPS or your existing networking device does not have a
WPS feature, select one of the alternative configuration options:
Wi-Fi (Extend an existing network), see page 21 for more information
or
Ethernet (Add wireless to your wired network), see page 24 for further
setup information.
Once the 120 second timer has elapsed, proceed to the next page.
D-Link DAP-1325/DAP-1330 User Manual

Connecting Your Device via WPS

19