Table of Contents
Advertisement
3
Start the Internet browser on your compatible
device and type "http://192.168.1.12/" into the
URL address field and display the page.
{. This unit's setup window is displayed.
≥ Examples of Internet browsers
iOS device/Mac : Safari
Android device : Google Chrome browser
PC : Windows Internet Explorer
4
Select "Search wireless network".
5
Select and input the details.
≥ Check your home wireless network name
(Network name (SSID)) and password for
this network. This can often be found on the
wireless network router itself.
[1] Select your home wireless network
name.*
1
[2] Type the password.
6
Select "JOIN" to apply the settings.
≥ In the pop-up screen, select "OK" to continue.
– Select "Cancel" to return to the setup window.
7
The unit's settings are completed when
"SUCCESS" is displayed and the Wi-Fi status
indicator stops blinking and lights in blue.
If "FAIL" is displayed press [OK], check the
wireless network password and other settings
and start again from step 1.
8
Make sure to connect your compatible device
back to your home wireless network.
*1: If you have set your wireless network to be invisible, select
"BACK" and refer to "Alternative settings".
Advanced network settings
≥ The below settings are the alternative or additional settings
for "Method 3". (l 8)
Alternative settings
Instead of steps 4 and 5
Select "Manual settings".
1
Type your home wireless network name
into the "Network name (SSID)" field.
2
Select the encryption method from the
"Security system" drop down list.
3
Type the password into the "Password" field
and then select "JOIN".
Additional settings
If your home wireless network has been
configured to use specific IP Addresses, Subnet
Mask, Default Gateway, Primary DNS, etc.
Before step 6
Select "Advanced network settings".
{. Input the required addresses into each field and select
"JOIN".
≥ To change the settings back to DHCP, select "ON" from the
"DHCP" drop down list.
If you want to change the name of this unit that is
displayed as the AirPlay speakers or DLNA
renderer.
Before step 4
Select "Additional settings".
1
Select "Edit STEREO SYSTEM name".
2
Type a new name into the
"STEREO SYSTEM name" field.
{. Only ASCII characters can be used.
3
Select "OK".
4
If this unit is already connected to your home
wireless network:
jSelect "Additional settings" and then
select "Exit".
If this unit is not connected to your home
wireless network:
jContinue to step 4 of "Method 3".
≥ Enable Java and Cookies in your browser settings.
≥ This unit can also be set using the WPS PIN code.
Replace step 2 of "Method 1" with the following steps.
(Before starting, refer to the wireless network router's
operating instructions for details on how to enter the PIN
code.)
1
While "WPS" is flashing press and hold [– WPS] again
to display the 8 digit PIN code.
{. Wi-Fi status indicator blinks purple.
2
Enter the PIN code into the wireless network router.
9
VQT4U49
Advertisement
Table of Contents
