Adjusting The Earpiece Volume During A Call; Turning On Manner Mode; Changing The Incoming Ring Tone - Hitachi HIY02 User Manual

■ One-ring Indicator
One-ring indicator on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Adjusting the Earpiece Volume
during a Call
During a call, use j.
u: Increases the volume.
•
d: Decreases the volume.
•
Press c (OK).
➡

Turning On Manner Mode

When the standby screen is displayed, hold down
( for at least one second.
This turns on manner mode, and displays
on the standby screen. This also turns on Answer memo,
which is indicated by on the standby screen.
Turning Off Manner Mode
■
When the standby screen is displayed, hold down ( for
at least one second.
Turning off manner mode causes
from the standby screen. Answer memo is also turned off,
which is indicated by disappearing from the standby
screen.
, , and
, , and to disappear
• Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.

Changing the Incoming Ring Tone

When the standby screen is displayed, press c.
Use a to select Function and then press
➡
c (Select).
Use j to select Sound/Vib/Lamp and then
➡
press c (Select).
Use j to select Incoming Setup and then press
➡
c (Select).
Use j to select Incoming Call and then press
➡
c (Select).
Use j to select
➡
c (Select).
Use j to select Original and then press
➡
c (Select).
Use j to select a ring tone and then press
➡
c (Set).
The incoming ring tone is set.
If you press & (Play), the tone plays.
•
Press % (OK).
➡
(Ringtone) and then press
16