Table of Contents
Advertisement
Returning a Call (Outgoing History/
Incoming History)
Example: Returning a call to a phone number in the
incoming history
When the standby screen is displayed, press l.
Press r while the standby screen is displayed to display
•
the Outgoing History screen.
Use j to select the phone number you want
➡
to call and then press c (Detail).
Press r to display the Outgoing History screen.
•
Press N.
➡
•
The cell phone can store up to 50 phone numbers in
each of the incoming and outgoing history.
One-ring Calls
What is a One-ring Call?
■
A one-ring call is a call from an unknown caller that only
rings once, causing it to be stored in the incoming history.
One-ring calls are often used to get you to return the call,
which will connect you to a dating service or some other
service that charges you at high rates.
■
One-ring Indicator
One-ring indicator on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Adjusting the Earpiece Volume
during a Call
During a call, use j.
u: Increases the volume.
•
d: Decreases the volume.
•
Press c (OK).
➡
Turning On Manner Mode
When the standby screen is displayed, hold down
( for at least one second.
This turns on manner mode, and displays
and
on the standby screen. This also turns on Answer
memo, which is indicated by
Turning Off Manner Mode
■
When the standby screen is displayed, hold down ( for
at least one second.
Turning off manner mode causes
disappear from the standby screen. Answer memo is also
turned off, which is indicated by
standby screen.
,
,
on the standby screen.
,
,
and
to
disappearing from the
16
Advertisement
Table of Contents
