Table of Contents
Advertisement
Pair Function
You can register a maximum of five pair partners you
contact often to easily call or send mail.
Registering a Pair Partner
When the standby screen is displayed, press N.
Use s to select a blank screen and then
➡
press c (Select).
Use j to select YES and then press c (OK).
➡
Use a to select a pair partner, press c (Detail)
➡
and then c (Select).
•
When registering a phone book entry with multiple
phone numbers and e-mail addresses as pair partner,
select the phone number and e-mail address to use
with the Pair function.
•
When you delete a phone book entry registered in the
pair partner, the phone book entry is also deleted from
the Pair function.
Making a Call to a Pair Partner
When the standby screen is displayed, press N.
Use s to select the person you want to call.
➡
Use j to select Call and then press c (Select).
➡
Sending Mail to a Pair Partner
When the standby screen is displayed, press N.
Use s to select the person you want to send
➡
mail.
Use j to select E-mail or C-mail and then
➡
press c (Select).
•
To create an e-mail message, see "Creating and
Sending E-mail Messages" on page 26. To create a
c-mail message, see "Creating and Sending C-mail
Messages" on page 29.
25
Advertisement
Table of Contents
