Download Print this page

Various Operation Methods; Hold Function; Hold; Hold Release - Hitachi WIRELESSIP5000 User Manual

Hide thumbs

Advertisement

User's Manual

3. Various operation methods

3.1. Hold function

This is used to put a call on hold. The hold tone is played on the terminal that you have put on hold.
3.1.1

Hold

During a call, you can put the other party on hold by pressing the Send key.
Example: Putting B on hold
While A and B are talking, if A presses the Send key, B is put on hold.
Press the Send key.
At this time, the screens for A (the terminal that put the call on hold) and B (the terminal that was put on
hold) display as below and the hold tone is played on B (the terminal that was put on hold).
<Screen for the terminal putting the
call on hold>
3.1.2

Hold release

During a hold, you can end the hold by pressing the Send key.
Hitachi Cable
A
A
Telephone number: 2314
A
A
Telephone number: 2314
56
During call
B
Telephone number: 2310
Holding
B
Telephone number: 2310
<Screen for the terminal put on
hold>

Advertisement

loading

  Also See for Hitachi WIRELESSIP5000

This manual is also suitable for:

Wip-5000