Makita XT506S Instruction Manual page 36

3
008313
To start the tool, simply pull the switch trigger. Air volume
is increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
Air volume adjusting dial
Air volume can be adjusted to any of three settings by
turning the adjusting dial with the switch trigger fully
depressed. Refer to the table below for the relationship
between the number on the dial and the air volume.
Number on the dial
3
2
1
008312
CAUTION:
Use the adjusting dial only after the switch trigger
•
returns to the "OFF" position. Turning the dial
before the trigger returns may damage the tool.
If the tool is operated continuously until the battery
•
cartridge has discharged, rest the tool for at least
15 minutes before proceeding with a fresh battery.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before carrying out
any work on the tool.
Blowing
1
008310
For dust blowing, attach nozzle to blower outlet, turning
clockwise to lock it in place.
To remove the nozzle, turn it counterclockwise.
1. Pointer
1
2. Air volume
adjusting dial
3. Switch trigger
2
Air volume
High
Medium
Low
1. Nozzle
2
2. Blower outlet
Dust suction
1
3
4
012984
For dust suction, fit nozzle onto suction inlet and dust
bag onto blower outlet.
After the bag fills with dust, empty the contents of the
dust bag into a dust bin by releasing the fastener.
007170
CAUTION:
Empty the dust bag before it becomes too full, or
•
the suction force weakens.
NOTICE:
The garden nozzle (optional accessory) is intended for
blowing use only. Do not use garden nozzle for suction.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before attempting to
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or the like.
•
Discoloration, deformation or cracks may result.
Cleaning
012985
From time to time, wipe off the outside of the tool using a cloth
dampened in soapy water. Never use gasoline, thinner or the
like, or discoloration and/or cracks can take place.
4
1. Dust bag
2
2. Blower outlet
3. Suction inlet
4. Nozzle
1. Fastener
1