Table of Contents
Advertisement
Section 3: Configuration
Here you can set the Simple Network Management Protocol (SNMP) settings for the camera, which allow for SNMP management of the camera.
After making any changes, click the Save button to save your changes.
Enable
Enable this option to allow for SNMPv1 and SNMPv2c management of the
SMNPv1,
camera.
SNMPv2c:
Read/Write
Enter a name for the read/write community of your SNMP server.
Community:
Read Only
Enter a name for the read-only community of your SNMP server.
Community:
Enable
Enable this option to allow SNMPv3 management of the camera.
SNMPv3:
Read/Write
Enter a name for the read/write community of your read/write SNMP server.
Security Name:
Authentication
Enter the type of authentication used by your read/write SNMP server.
Type:
Authentication
Enter the authentication password used for your read/write SNMP server.
Password:
Encryption
Enter the encryption password used for your read/write SNMP server.
Password:
Read Only
Enter a name for the read-only community of your read-only SNMP server.
Security Name:
D-Link DCS-4602EV User Manual
SNMP
62
Advertisement
Table of Contents
