Connecting A Printer; Setting Up A Printer From A Computer - Buffalo LS220D0802-EU User Manual

3
Enter the URL at "Or enter a URL:" and click Upload. The downloaded file will be saved in the folder that is
specified in the "Destination folder" field.
Note: Check "Start when added" to start downloading immediately after clicking Upload.
4
The download will start.
Note: To cancel downloading, click
to resume.

Connecting a Printer

You can connect a printer to the USB port on the LinkStation.
Notes:
• Only one USB printer can be connected to the LinkStation.
• Bidirectional communication is not supported i.e., remaining ink quantities and other printer status
information is not supported.
• Don't disable the SMB protocol while the print server is enabled. If you do, you will need to enable SMB again
and reconfigure the print server from scratch.

Setting Up a Printer from a Computer

1
Connect a printer to the LinkStation's USB port, then turn the printer on.
2
In Advanced Settings, click Services.
3
Move the print server switch to the
4
Refer to the manual supplied with the printer and install the printer drivers.
and Remote. Click
position to enable the print server.
103
to pause the download. Click or