Table of Contents
Advertisement
7.
Dark Boost: Adjust the Dark Boost from off to level3. Enhances shadows by increasing
the brightness without changing lighter shades. Note: If the image is very bright or has
few shadow.
-----------------------------------------------------------------------------------------------------------
Note: If the image is very bright or has few shadow areas, adjusting this setting
may not result in any noticeable changes to the image.
8.
Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- 80%, 70%, 60%, or 50%.
--------------------------------------------------------------------------------------------------------------------------
Note: Higher values allow more blue light through. For the best protection select a lower
value.
9.
Adaptive contrast: It usually increases the global contrast of many images, especially
when the usable data of the image is represented by close contrast values.
Color
Mode - Standard
Picture
Gamma
Color
Color Temp.
Audio
Red Color
Green Color
Gaming
OSD
Blur Color
Saturation
System
6-axis Color
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard
value for Windows).
5.
Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or
User.
6.
Saturation: Based on favorite to adjust the color saturation from 0~200. (NV design)
7.
6-axis Color: Adjust the red, green, blue, yellow, magenta color or reset.
12
22
Warm
50
50
50
X
100
Advertisement
Table of Contents
