Subscribe to Our Youtube Channel
Related Manuals for Acer XV431C
Summary of Contents for Acer XV431C
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Acer Nitro XV431CPwmiiphx o cerca il tuo prodotto tra le migliori offerte di Monitor Acer LCD Monitor User Guide...
- Page 2 Serial number: ___________________________________ Date of purchase: _________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
-
Page 3: Special Notes On Lcd Monitors
Information for Your Safety and Comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. •... -
Page 4: Warnings
Warnings • Do not use this product near water. • Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. • Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. -
Page 5: Potentially Explosive Environments
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products. -
Page 6: Lcd Pixel Statement
LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: •... -
Page 7: Developing Good Work Habits
Display • Keep your display clean. • Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display. • Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity. - Page 8 (“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized...
- Page 9 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110, U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 10: Table Of Contents
Information for Your Safety and Comfort Safety instructions Special notes on LCD monitors Cleaning your monitor Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Disposal instructions LCD pixel statement Tips and information for comfortable use Finding your comfort zone Taking care of your vision... - Page 11 Main Menu The Function page TROUBLESHOOTING HDMI/DP Mode (Optional)
-
Page 12: Package Contents
PACKAGE CONTENTS LCD Monitor AC Power Cord DP Cable (Optional) HDMI Cable (Optional) Remote Control Quick Start Guide HDMI LCD Monitor NITRO XV1 Series/XV431C USER GUIDE VESA Adapter Mounting Kit... -
Page 13: Attaching The Monitor To The Base
Attaching the monitor to the base 1. Unpack the box. 2. Take the Styrofoam with display out of the box. 3. Remove the top Styrofoam. 4. Tighten the base and stand arm with three screws. 5. Attach the base of step 4 to the quick 6. -
Page 14: Screen Position Adjustment
SCREEN POSITION ADJUSTMENT To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees down. Note: Do NOT press the screen with fingers. -
Page 15: Connecting The Power Cord
CONNECTING THE POWER CORD • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Connecting the adapter and AC Power cord • Check first to make sure that the power cord you use is the correct type required for your area. -
Page 16: Display Data Channel (Ddc)
Display Data Channel (DDC) To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. -
Page 17: 19-Pin Color Display Signal Cable
19-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION DATA2- DATA2+ DATA1- DATA1+ DATA0- DATA0+ DCLK- DCLK+ HDMI_SCL HDMI_SDA HDMI_DET HDMI15V HDMI_HPD... -
Page 18: Standard Timing Table
STANDARD TIMING TABLE Mode Resolution 640 x 480 60 Hz 640 x 480 72 Hz 640 x 480 75 Hz 640 x 480 66.66 Hz VESA 720 x 400 70 Hz 800 x 600 56 Hz 800 x 600 60 Hz SVGA 800 x 600 72 Hz... -
Page 19: Connecting Your Monitor To A Computer
Connecting Your Monitor to a Computer 1. Make sure both the monitor and computer are powered-OFF. 2. Connect DP Cable (Only DP-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DP cable to the computer. 3. -
Page 20: External Controls
External Controls 1 2 3 4 5 Icon Item Description a. Press to trigger Mode control. b. When the OSD menu is enabled, Input button / Exit press to exit the current menu and go back one level. a. Press the key to open the Brightness control. -
Page 21: Using The Shortcut Menu
Using the Shortcut Menu The following content is for general reference only. Actual product specifications may vary. The OSD (On Screen Display) can be used to adjust the settings of your LCD monitor. Press the key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. - Page 22 Hot key2 (default: Brightness) Open the Brightness control and select the brightness setting. When you are done, use go back one level.
- Page 23 Main Menu The Function page Open the Function page to select a menu function, and adjust the settings which you want using the arrows. You can also view your monitor’s system information from this page. When you are done, use to go back one level.
- Page 24 8. Blue Light: filter out blue light by adjusting different Blue Light showing ratio - 80%, 70%, 60%, 50%. Note: Higher values allow more blue light through. For the best protection, select a lower value. 9. ACM: Turn ACM on or off. The default is off. 10.
- Page 25 4. Gamma mode allows you to adjust the luminance tone. The default value is 2.2 (standard value for Windows). 5. Color temperature: Default is warm. You can choose Normal, User, Bluelight, Cool and Warm. 6. Modes: Select your preferred mode from Action, Racing, Sports, User, Standard, ECO, Graphics and HDR.
- Page 26 Gaming Mode - Standard Picture Over Drive Normal FreeSync Premium Color Audio Refresh Rate Num Gaming AimPoint System Information 1. Press the MENU key to open the OSD. 2. Using the button, select Gaming from the OSD. Then navigate to the setting you wish to adjust.
- Page 27 6. VRB: To choose whether to support dynamic picture more clean control, default is Off. Note: 1. It is not support VRB when HDR set to "On" or "Auto". 2. VRB function does not affect the (Logo, Aim Point, Message and Input Icon) brightness.
- Page 28 7. OSD Lock: OSD Lock function is used to prevent OSD button from being pressed accidentally. Note: 1. OSD Locked: Set the OSD Lock to "On" from the OSD and press "Enter". The "OSD Locked" message will appear in the middle of the screen, and LED lights will indicate as blinking blue.
- Page 29 6. Auto Source: Automatically searches for available input sources. 7. Wide Mode: You can select which screen aspect you are using. The options are Aspect, 1:1, 21:9 and Full. 8. Lighting: Choose a favorite from functions. Lighting Switch: Lighting main switch ,default is "On". Lighting Style: 4 kinds of style choice: Static(Default), Flashing, Breathing ,Marquee.
- Page 30 Save Setting to...(User mode only) Mode - U Picture Game Mode: Action Game Mode: Racing Color Game Mode: Sports Gaming System Information Save Settings to... 1. Press the MENU key to open the OSD. 2. Using the button, select “Save Setting to...” from the OSD. Then select the preferred mode.
- Page 31 TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. HDMI/DP Mode (Optional) Problems Current Status Remedy No Picture Blue Using OSD, adjust brightness and contrast to maximum or reset to their default settings.
Need help?
Do you have a question about the XV431C and is the answer not in the manual?
Questions and answers