Table of Contents
Advertisement
Duplex Printing
Use this function to select duplex printing.
Limitation
❒ To use this function, the optional duplex unit must be installed on the ma-
chine.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/XP,
Windows Server 2003
Windows NT 4.0
Mac OS
Mac OS X
You can select the following items: The following items may vary depending on
the operating system you are using.
Windows 95/98/Me
❖ ❖ ❖ ❖ Off
Disables Duplex Printing.
❖ ❖ ❖ ❖ Open to Left
Prints output so that you can open it to the left.
❖ ❖ ❖ ❖ Open to Top
Prints output so that you can open it to the top.
Windows 2000/XP, Windows Server 2003, Mac OS, Mac OS X
Note
❒ If you use a Mac OS, click to select the button that means "Flip on Long Edge"
or "Flip on Short Edge".
❖ ❖ ❖ ❖ None
Disables Duplex Printing.
❖ ❖ ❖ ❖ Flip on Short Edge
Prints output so that you can open it to the short edge when bound along the
short edge.
❖ ❖ ❖ ❖ Flip on Long Edge
Prints output so that you can open it to the long edge when bound along the
long edge.
[Duplex:] on the [Setup] tab.
[Print on Both Sides (Duplex)] on the [Layout] tab in the
Printing Preferences dialog box.
[Print on Both Sides (Duplex Printing)] on the [Page Setup] tab
in the Document Defaults dialog box.
[Print on Both Sides] on [Layout] in the print dialog box.
The [Print on both Sides] check box on [Duplex:] in the print
dialog box.
Printing a Document
91
3
Advertisement
Table of Contents
