Collate; Duplex Printing - Gestetner P7126 Operating Instructions Manual

Gestetner p7126: supplementary guide
Hide thumbs Also See for P7126:
Table of Contents

Advertisement

Using PostScript 3

Collate

Use this function to enable collation. With this feature, the printer can efficiently
print collated sets of multiple-page documents.
1
Limitation
❒ To use this function, the optional Memory Unit of 96MB in total or Hard Disk
Drive must be installed on the printer.
❒ If you select Upper Tray as an output tray, it is shift collated automatically.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/Windows XP
Windows NT 4.0
Macintosh

Duplex Printing

Use this function to select duplex printing.
Limitation
❒ To use this function, the optional Duplex Unit must be installed on the print-
er.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/Windows XP
Windows NT 4.0
Macintosh
You can select the following items. The following items may vary depending on
the operating system you are using.
Windows 95/98/Me
❖ ❖ ❖ ❖ Off
Disables Duplex Printing.
❖ ❖ ❖ ❖ Open to Left
Prints output so that you can open it to the left when bound along the left
edge.
6
[Collate] on the [Setup] tab.
[Printer Features] on [Advanced...] on the [Paper/Quality] tab
in the Printing Preferences Properties.
[Printer Features] on [Document Options] on the [Advanced]
tab.
[Collate:] on [Printer Specific Options] in the print dialog
box.
[Duplex] on the [Setup] tab.
[Print on Both Sides (Duplex)] on the [Layout] tab in the
Printing Preferences Properties.
[Print on Both Sides (Duplex Printing)] on the [Page Setup] tab
in the Document Defaults dialog box.
[Print on Both Sides] on [Layout] in the print dialog box.

Advertisement

Table of Contents
loading

This manual is also suitable for:

P7126nPostscript 3

Table of Contents