Table of Contents
Advertisement
Adjustment Method
Sub-Contrast/White Balance Adjustment
Instrument Name
1.
Remote controller
2.
LCD WB meter (Minolta CA-210 or equivalent)
3.
Comunication jig
4.
Computer for external control
Subcontrast adjustment
1.
Receive PAL colour bar (100% white) RF signal.
2.
Enter "Contrast" adj. In SERVICE mode.
3.
Start adjusting by using Yellow Key.
4.
If the adjustment finished normally, the letter of Contrast will change from red
to black.
White Balance adjustment
1.
Procedure basically performs checking using the production software and
make automatic adjustment using external computer.
2.
It adjusts in the mode of: Colour balance Normal
Highlight
Lowlight
Procedure
Viewing Mode Dynamic
Normal
x: 0.307 0.010
y: 0.322 0.010
Normal
x: 0.307 0.010
y: 0.322 0.010
Connect to
25
Remarks
Correlation can be also taken by
CS-1000A or equivalent
Remarks
Let the panel standfor more than 3
hours at more than 20 C.
Basically perform adjustment in the
ambient environment of room
temperature more than 20 C.
The aging time is more than20 min
at above room temperature.
Applied signal
100% full colour bar
0.7V p-p white peak
85% modulation
100% WHITE
50% GRAY
Advertisement
Table of Contents
