Table of Contents
Advertisement
24
UseR seTTInGs
Picture
1
To view the osD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2
Go to screen > Picture by moving the joystick.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing (
5
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Each option is described below.
Menu > screen > Picture
sharpness
black level
Response Time
/ OK) it.
Adjusts the sharpness of the screen.
Sets the offset level (for HDMI only).
• offset: as a reference for a video signal, this is the darkest color the monitor can dis-
play.
High
The picture of the screen gets brighter.
low
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Middle. For a fast-moving
picture, it is recommended that you use high.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
low
Sets the response time to Low.
off
Does not use the response time improvement feature.
Picture
sharpness
easy control
black level
Response Time
function
PbP
screen
settings
Reset
▲/▼: Move
Description
>
5
>
High
>
Middle
◄: Back
/ ►: OK
Advertisement
Table of Contents
