[Picture Adjust] - LG UltraGear 27GR95UM Owner's Manual

[Picture Adjust]

[Settings] > [Picture Adjust]
[Brightness]: Adjusts the brightness of the screen.
•
[Peak Brightness]: Adjust the panel peak brightness for a brighter screen.
•
[Contrast] (for SDR only): Adjusts the color contrast of the screen.
•
[Sharpness]: Adjusts the sharpness of the screen.
•
[Gamma] (for SDR only)
•
- [Mode 1], [Mode 2], [Mode 3]: The higher the gamma value, the darker the image becomes. Likewise, the lower
the gamma value, the lighter the image becomes.
- [Mode 4]: If you do not need to adjust the gamma settings, select [Mode 4].
[Color Temp] (for SDR only): Set your own color temperature.
•
- [Custom]: The user can customize the red, green and blue color.
- [Warm]: Sets the screen color to a reddish tone.
- [Medium]: Sets the screen color to between a red and blue tone.
- [Cool]: Sets the screen color to a bluish tone.
- [Manual]: The user can fine-tune the color temperature.
[R/G/B] (for SDR only): You can customize the picture color using red, green, and blue colors.
•
[Six Color] (for SDR only): Meets the user requirements for colors by adjusting the saturation of the six colors (red,
•
green, blue, cyan, magenta, and yellow) and then saving the settings.
- Hue: Adjusts the tone of the screen colors.
- Saturation: Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the
colors become. The higher the value, the more saturated and darker the colors become.
[Black Level] (for SDR only): Sets the offset level (for HDMI only).
•
Offset: as a reference for a video signal, this is the darkest color the monitor can display.
- [High]: Keeps the current contrast ratio of the screen.
- [Low]: Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
[Local Dimming]: Maximizes the contrast ratio by making the bright areas of the screen brighter and the dark areas
•
of the screen darker. Turning this option off may increase energy consumption.
[Picture Reset]: Returns picture and color to the default settings.
•
21