Installing On A Table - LG 34UC97C Owner's Manual

Input connector cover
6
CaUTIon
Illustrations in this document represent typi-
y
cal procedures, so they may look different
from the actual product.
Applying excessive force when tightening
y
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
Be careful not to hurt your hand on the edges
y
of the screw covers.
Do not carry the monitor upside down by just
y
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
y
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
noTe
You can disassemble the stand in the
y
reverse order of the assembly.
asseMblInG anD PRePaRInG

Installing on a Table

1
Lift the monitor and place it on the table in an
upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient
ventilation.
10 cm
10 cm
2 Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
3 Press the joystick button on the bottom of the
monitor to turn on the monitor.
CaUTIon
Unplug the power cord before moving or
y
installing the monitor. There is risk of electric
shock.
9
10 cm
10 cm