Section 1 - Product Overview
1
Reset Button
2
Status/WPS LED
3
WPS Button
4
Signal Indicator LED
D-Link DAP-1530 User Manual
Hardware Overview
Top
1
4
Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1530 until the
status LED turns red, to reset the device back to factory default settings.
This LED indicates the current status of the DAP-1530.
Refer to "Status/WPS LED Indicator" on page 7 for more information.
Press to establish a connection with another WPS compatible device.
Refer to "WPS Button" on page 43 for more information.
The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network.
For more information refer to "Optimize Extender Location" on page 14.
2
3
5