Audio Setup Page - Philips HTS6500 User Manual

DVD Setup Menu Options
Audio Setup Page
(underlined options are the factory default settings)
This setting is only required if you are using the DVD system's
HDMI OUT jack to connect your TV or other display device (see
_Option4: Connecting to a HDMI-compadble TV'.)
Note: may take a while for the DVD system and the input device to
communicate and initialize.
Off } - Select this if the playback audio format is not
supported by HDMI connection (e.g.
projector, SACD.) It will turn off the HDMI
audio output.
PCM - Select this to downmix the audio signals to
linear-PCM (2-channel).
All } - Select this to enioy the multi-channel audio
output through the HD["ll connection.
Note: It is not possible to listen to SACDs el" copy-controlled DVD-
Audio CPPM (Content Protection for Playable Media) sources using the
HDHI connection.
This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ On } - Turns on night mode.
{ Off } - Turns off night mode feature. Selects this to
enjoy the surround sound with its full
dynamic range.
This feature allows you to adjust the audio delay times if the
video playback is slower than the audio output streams, hence
resulting
in lip-sync.
Access the lip sync setup menu. Use _ _ keys to set the delay
times (0 _ 200 ms) for the audio output.
38