Philips HTS3545W User Manual page 55

Troubleshooting
Prob em (USB/HDMI)
The contents of the USB ash
drive cannot be read.
Slow operation of the USB
ash drive.
No audio output from HDMI
connection.
No video output from HDMI
connection.
If the indicator on the wireless
transmitter blinks
continuously for more than
one minute.
54
(continued)
So ut on
– The USB ash drive format is not compatible with this
unit.
– Drive is formatted with a different le system which is
not supported by this unit (e.g. NTFS.)
– Large le size or high memory USB ash drive takes
longer time to read and display on the TV.
– You will not hear any sound from the HDMI output if
the source device is only DVI/HDCP (High-bandwidth
Digital Content Protection)-compatible.
– It is not possible to output SACD or copy-controlled
DVD-Audio sources from the HDMI connection.
– Make sure that the audio output setting is not turned
off. See 'Setup Menu Options - { Audio Setup Page -
HDMI Audio }' for details.
– HDMI connection can only be made to HDMI-
equipped devices with HDCP (High Bandwidth Digital
Content Protection.) If you wish to connect to a DVI
connector (equipped with HDCP,) you will need a
separate adaptor (DVI to HDMI.)
– Make sure the resolution of this unit matches the
device you have connected using the HDMI. See
'Setup Menu Options - { Video Setup Page - HDMI
Setup - HDMI Video }' for details.
– The transmitter may have been swapped with another
transmitter supplied with other receiver.
– Turn off all connected devices.
– Turn on the connected home theatre system.
– Press and hold the CONNECT button on the
transmitter for ve seconds. Release the CONNECT
button.
– Turn on the wireless receiver.