Advertisement
Quick Links
Wireless
Security
Solutions
RE210P+ Honeywell-Compatible PIR Motion, Pet-Immune
Features
• PYROFLEX™ IR sensor has superior detection.
• HighBar™ signal processing reduces false alarms.
• 40 Pound Pet Immunity / 85 pounds with Pet Lens (sold separately)
• 2-pulse and 3-pulse sensitivity levels.
• 44 foot range and 90 degree field of view (45 degrees to each side)
• Mountable on Flat-wall, 45 degree corner, or swivel/gimbal (sold separately).
• Cover tamper.
• Strong, reliable RF signal.
• 6-8 year battery life on CR123A battery.
• Low Battery indication.
Key Instructions
• Mount at 7.5 foot height (standard 40 pound lens) for optimum performance
between: Catch performance, Pet Immunity and False Alarm prevention.
• Sensitivity Jumper to Normal for less sensitivity; High for more sensitivity.
• LED Jumper
LED for walk test:
• LED lights when motion sensed, AND
• Wireless transmissions sent for each detection.
LED for Normal Operation:
• PIR stops (locks out) transmitting wireless sensor
alarms for 3 minutes after sending an alarm
transmission. This is to conserve battery life.
• Enrolling:
Press tamper switch for enrollment in Honeywell panel. Tamper
sends signals in either LED Walk Test or Normal mode.
• Make sure bug / insulation foam is installed.
• Testing for enrollment in panel:
Put panel in desired test or operation mode.
Wait for 3 minutes for PIR's 3 minute lockout to clear.
Walk in front of PIR.
Operation
• PIR sensing element produces pulses.
• PIR sends wireless transmission after 2 or 3 (select via jumper) pulses.
• Tamper, when cover is opened.
• Supervisories, every hour.
RE210P+_New_Honeywell-Compat_PIR_Instructions.doc
www.ResolutionProducts.com
Page 1 of 3
26-Apr-11
Specifications
Mounting hardware:
# 4 or #6 screws
Mounting height:
7.5 ft with normal lens (40 pounds)
4.5 feet with pet lens (85 pounds)
Replacement Battery:
CR123A 1550mAH
Temperature Range:
0F to 120F
Housing dimensions:
3.5x2.0x1.7 inches
Specifications subject to change without notice.
7.5 ft
(4.5 with
Pet Lens)
10 ft
20 ft
30 ft
Internal Picture
Battery
+
Sensitivity
Jumper
RE210P+_New_Honeywell-Compat_PIR_Instructions.doc
www.ResolutionProducts.com
56 ft
0
40 ft
40 ft
56 ft
Motion Sensor
Loop 1
Walk Test
LED
Tamper &
Walk Test
Switch
Loop 4
Page 2 of 3
26-Apr-11
56 ft
Advertisement
Related Manuals for Resolution Products RE210P
Summary of Contents for Resolution Products RE210P
- Page 1 Solutions 4.5 feet with pet lens (85 pounds) Replacement Battery: CR123A 1550mAH Temperature Range: 0F to 120F RE210P+ Honeywell-Compatible PIR Motion, Pet-Immune Housing dimensions: 3.5x2.0x1.7 inches 56 ft Features Specifications subject to change without notice. • PYROFLEX™ IR sensor has superior detection.
- Page 2 “GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC.
Need help?
Do you have a question about the RE210P and is the answer not in the manual?
Questions and answers
How do I remove the cover to replace the battery on the RE210P motion detector?
The document does not provide specific instructions for removing the cover to replace the battery on the Resolution Products RE210P motion detector. However, it mentions that the device has a cover tamper feature, which suggests that opening the cover may trigger a tamper alert. Typically, motion detectors have a small latch or screw securing the cover, which needs to be released before lifting the cover off.
This answer is automatically generated