Resolution Products Mighty Mouse RE111 Instructions

Wireless
Security
Solutions
RE111 Mighty Mouse™ GE-Compatible Micro Door Sensor
Features
• Smallest Door/Window Sensor & Magnet in the Industry.
• Full-sized transmit range, AND...
• 4-6 year battery life on CR1632 battery.
• Invisible external antenna – gives great range and long life
• Low Battery indication.
Mounting
1.
Remove
High Bond
tape liners
Run a light coat of
permanent paste
4.
glue on the
underside of the
wipe it down
antenna
with finger
Antenna Routing Options
DON'T MOUNT
ON METAL,
It will severely
reduce transmit
range and
magnetic gap
C. Route into trim gaps or
along side of trim
RE111_GE-Compat_Micro-DWS_Instructions.docPage 1 of 4
www.ResolutionProducts.com
Align
½ inch or less
centering marks magnet gap
2.
Position Antenna free and clear of sensor;
not inside cover or under sensor.
3.
A. Fasten with paste glue, as above.
B. Or let it lay on surface, nearly invisibly.
D. Drill hole and
thread antenna down
9-Apr-12
Enrolling in Panel
.
1. Put GE panel in enrollment mode.
2. Pull out the red tab to trip the sensor. This powers the sensor and it sends
a tamper enrollment signal.
Tamper-Enroll signal
3. The tamper enrollment signal can be re-sent by touching a magnet to the
sensor 5 times within 5 seconds.
Open/Close 5 times
in 5 seconds
Internal Picture
Battery
Minus side up
Reed Switch
Antenna
RE111_GE-Compat_Micro-DWS_Instructions.docPage 2 of 4
www.ResolutionProducts.com
Pull Tab to send
Sensor sends
tamper
enrollment
signal
Battery
contacts
9-Apr-12