[Freeze]; [Digital Zoom] - Panasonic PT-MZ570 Operating Instructions Manual

Setting the countdown timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to set the time.
f The time can be set from 1 minute to 180 minutes in one-minute interval.
f The factory default setting is 10 minutes.
Note
f [TIMER] can be set when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select an item, and press the <ENTER> button.
[START]
[STOP]
[RESTART]
[RESET]
[EXIT]
f Elapsed time or remaining time is displayed in the bottom right of the projected image when [START] or
[RESTART] is selected.
f The elapsed time or remaining time when it was stopped is displayed in the bottom right of the projected
image when [STOP] is selected.
Note
f The presentation timer can be operated by the <P-TIMER> button on the remote control. (x page 76)
f The security message set in the [SECURITY] menu → [DISPLAY SETTING] (x page 136) is not displayed while the elapsed time or
remaining time is displaying.
f The elapsed time or remaining time is not displayed while the menu screen is displayed.
f When [MODE] is set to [COUNT UP], the start time will be "000:00".
f When [MODE] is set to [COUNT DOWN], the start time will be the value set in [TIMER].
f The timer gauge will turn clockwise when set to [COUNT UP], and turn counterclockwise when set to [COUNT DOWN].

[FREEZE]

The projected image is paused and audio is turned off regardless of the playback of the external device.
1) Press as to select [FREEZE].
2) Press the <ENTER> button.
f Press the <MENU> button or the <RETURN> button to clear.
Note
f [FREEZE] is displayed on the screen when video is paused.
f Operation of [FREEZE] can also be performed with the <FREEZE> button on the remote control. (x page 73)

[DIGITAL ZOOM]

(When RGB signal for still images, HDMI signal for still images, or DIGITAL LINK signal for still images is input.
Or, when MEMORY VIEWER, Panasonic APPLICATION, or MIRRORING is input.)
1) Press as to select [DIGITAL ZOOM].
Chapter 4 Settings — [DISPLAY OPTION] menu
Starts the count.
Stops the count.
Restarts the count.
Resets the count.
Ends the presentation timer.
ENGLISH - 111