Dometic Waeco TropiCool TC-14FL-AC Instruction Manual page 22

Operation
6.2 TC35FL-AC: Opening the cooler
The TC35FL-AC cooler must be unlocked for opening (fig. 4, page 4).
6.3 Switch on the cooling box
A
NOTICE!
Take care that there are only objects or goods in the cooling box
which may be cooled or heated to the selected temperature.
➤ Place the cooling box on a stable base.
I
NOTE
The plug is safe against wrong polarity: You can plug it only in one
direction into the (fig. 3, page 4) socket.
➤ Connect the cooling box
– with the connecting cable contained in the scope of delivery to a 220-
240 V socket or...
– with the supplied connecting cable to the 12/24 V socket in the vehicle
(fig. 3, page 4).
➤ Press the button "ON/OFF" at the control panel (fig. 2 A, page 4) to
switch on the cooling box.
✓ The cooling box starts to cool or heat the interior space.
Operating display
red (fig. 2 B, page 4)
blue (fig. 2 C, page 4)
6.4 Switch over between cooling and heating
➤ If you want to switch over between cooling and heating, press the button
"HOT/COLD" (fig. 2 D, page 4).
I
NOTE
The control unit of the cooling box has a memory function. It mem-
orises the selected temperature range for each mode (cooling and
heating). Thus the temperature range which is previously
selected in the mode is set again with each switching on or switch-
ing over.
22
Operating mode
heating
cooling
TC
EN