Canon MAXIFY MB2750 Online Manual page 795

Note
• Only Grayscale will be displayed in Channel when Color Mode is Grayscale.
Brightness
Adjust the image brightness.
Move (Slider) under Brightness to the left to darken and right to brighten the image. You can also
enter a value (-127 to 127).
Darkened
Note
• Highlights may be lost if you brighten the image too much, and shadows may be lost if you darken
the image too much.
Contrast
"Contrast" is the degree of difference between the brighter and darker parts of an image. Increasing
contrast will increase the difference, thus sharpening the image. Decreasing contrast will decrease the
difference, thus softening the image.
Move (Slider) under Contrast to the left to decrease and right to increase the contrast of the image.
You can also enter a value (-127 to 127).
Decreased contrast
Original image
Original image
795
Brightened
Increased contrast