Table of Contents
Advertisement
q
w
e
4
z
x
c
q
w
e
4
Drawn Work
q Stitch pattern:
w Thread tension dial: 1 to 4
e Presser foot:
Drawn work uses the same method as fringing. Choose
a firm, woven fabric like linen where threads can be
removed easily.
z Carefully cut the fabric on the grain. Determine the
width of the drawn work and remove one strand of
yarn or fabric thread at each end.
x Sew down the left side, guiding the fabric so the right
hand stitches fall in open space. After finishing the left
side, turn the fabric around 180°. Sew down the other
side.
c Remove the yarn or fabric threads between the
stitching.
Cross Stitch
q Stitch pattern:
w Thread tension dial: 3 to 6
e Presser foot:
* The stitch pattern 41 can also be used.
You can make cross stitch designs with these patterns, in
half the time it would take if embroidered by hand.
Use a plain close woven fabric such as linen or wool
flannel. If you use light weight fabric, apply a tear away
backing for support.
Sew from the center of the design outward.
q
If you press the auto-lock button before sewing, the
machine will sew one unit of the cross stitch and stop
automatically.
q Auto-lock button
54
27
Satin stitch foot F
15
Satin stitch foot F
Advertisement
Table of Contents
