Mounting On A Table; Adjusting The Angle - LG 24CAV37K Owner's Manual

6
ASSEMBLING AND PREPARING

Mounting on a table

1
Lift the monitor and place it on the table in an
upright position.
Install at least 3.94 inches away from the wall
to ensure sufficient ventilation.
3.94 inches
3.94 inches
2
Connect the adaptor to the monitor, then plug
the power cord into the wall outlet.
3
Press the (Power) button on the front of the
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or
y
installing the monitor. There is risk of electric
shock.

Adjusting the angle

1
Place the monitor mounted on the stand base
in an upright position.
2
Adjust the angle of the screen. The angle of
the screen can be adjusted up to 5° forwards
and 35° backwards for a comfortable viewing
experience.
3.94 inches
3.94 inches
To avoid injury to the fingers when adjusting
y
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Be careful not to touch or press the screen
y
area when adjusting the angle of the monitor.
Rear Side
WARNING
Front Side