1. Manuals
  2. Brands
  3. Amrel Manuals
  4. Tablet
  5. ROCKY DT10
  6. User manual

Amrel ROCKY DT10 User Manual

Rugged tablet
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROCKY DT10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Amrel ROCKY DT10

Summary of Contents for Amrel ROCKY DT10

  • Page 1 USER’S GUIDE...
  • Page 2 No part of this publication may be reproduced and modified without the written permission of AMREL. AMREL. reserves the right to make changes in the products or the product specifications without any prior notice. Customers are advised to contact AMREL. for updated product information.
  • Page 3 Revision History: Revision Date Changes Author 1.0.0 2015/05/20 Official Release Pablo Tseng...
  • Page 4 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Regulatory Information/Disclaimers Installation and use of this computer must be in strict accordance with the instructions included in the user documentation provided with the product.
  • Page 5 FCC (Federal Communications Commission) Statement This equipment has been tested and found to comply with the limits for a Class-B digital device pursuant part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiates radio frequency energy.
  • Page 6 Products with the CE Marking comply with both the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EN55022 CISPR 22 Radio Frequency Interference EN55024 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61000-3-2, EN61000-3-3, Generic Immunity...
  • Page 7 CE Declaration of Conformity It is confirmed to comply with the requirements set out in the Council Directive on the approximation of the laws of the member states relating to Electromagnetic Compatibility (2004/108/EC), Low-voltage Directive (2006/95/EC), Amendment Directive (93/68/EEC), and the procedures given in European Council Directive (99/5/EC and 2004/108/EC ).
  • Page 8 Power Conservation This tablet computer consumes less power compared to conventional consumer computers. The power consumption may be further reduced by properly configuring the Power Management Setup. It is recommended that the power saving features be enabled even when not running on battery power.
  • Page 9 Battery Precautions Only use batteries designed for this tablet computer. Using incompatible battery types  may cause explosion, leakage or damage to the computer.  Do not remove the battery from the computer while the computer is powered on.  Do not continuously use a battery that has been dropped, or that appears damaged (e.g.
  • Page 10 Environmental Information, Material Safety & Recycling All materials used in the manufacturing of this equipment are recyclable or environmentally friendly. Please recycle the packing materials in accordance with local regulations at the end of the product's service life. Notice:  The equipment may contain insignificant amount of hazardous substances for health and environment below control level.

  • Page 11: Table Of Contents

    TABLE OF CONTENTS CHAPTER 1 - GETTING STARTED ............... 1   ........................1  NPACKING ........................2  ORKPLACE ....................2  NVIRONMENTAL ATINGS ......................... 3  UGGEDNESS ....................4  PPEARANCE VERVIEW ......................9  EADY FOR CHAPTER2 - OPERATING INFORMATION ..........11   ................ 11  TART SING ABLET...
  • Page 12 ..................48  HIPSET ELECTIONS PCH-IO C ................48  ONFIGURATION ........................50  ....................50  ELECTIONS ......................51  ECURITY & E ....................... 52  CHAPTER 5 – DRIVERS AND APPLICATIONS ......... 53   ........................53  HIPSET VGA ..........................54  ........................... 54  UDIO ME ........................55  NTEL ................
  • Page 13 ....................... 69  ATTERY ........................69  ECURITY DL10 ......................70  OCKLIGHT DR ..................70  ULTI ATTERY HARGER USB K ................... 71  XTERNAL EYBOARD KBD ....................72  EYBOARD CHAPTER 8 – MAINTENANCE AND SERVICE .......... 73   ........................73  LEANING ....................... 73  ROUBLESHOOTING RMA S ......................

  • Page 14: Chapter 1 - Getting Started

    Getting Started Chapter 1 - Getting Started Unpacking The following components come with your computer. If anything is missing or damaged, please notify the dealer immediately. Computer unit  AC Adapter   AC Power Cord  Utility DVD  Quick Guide ...

  • Page 15: Workplace

    Getting Started Workplace A clean and moisture-free environment is preferred. Make room for air circulation. Remember to avoid areas from:  Sudden or extreme changes in temperature.  Extreme heat.  Strong electromagnetic fields (Near television set, motor rotation area, etc.). ...

  • Page 16: Ruggedness

    Getting Started Ruggedness The computer is designed with rugged features such as vibration, shock, dust, and rain/water protection. However, it is still necessary to provide appropriate protection while operating in harsh environments. NEVER immerse the computer in water. Doing so may cause permanent damages. Drop may cause parts break or permanent damages.

  • Page 17: Appearance Overview

    Getting Started Appearance Overview Note:  The following illustrations show the tablet mounted on certain optional devices, which may not appear on your devices. Front Power Button LED Indicators Application Keys & Input Lock Key (Please refer to “Using Indicators and Keyboard” for more details) Touch Screen Keyboard...
  • Page 18 Getting Started Rear Secondary battery connector Chapter One - 5...
  • Page 19 Getting Started Left 1. Battery 2. GLAN RJ45 3. USB 2.0 x 1 (Top) USB 2.0 with Fast Charger x 1 (Bottom) 4. Multi Bay: - ExpressCard (Top) - SIM Card + SD Card (Bottom) Note:  SIM Card slot function requires optional WWAN module installed in your tablet computer.
  • Page 20 Getting Started Right 1. DC jack ( 2-pin for I model, 3-pin for M model) 2. Serial port DB9 (COM1, Default: RS232) Note:  The External COM1 port default is RS232, and can be selected by BIOS (RS232/RS422/RS485).Please refer to IT 8783F Super IO Configuration Sub-Menu in BIOS section.
  • Page 21 Getting Started 1. Optional Wi-Fi Antenna 2. Optional GPS Antenna 3. Optional WWAN Antenna 4. 2.5” SATA II HDD / SSD Bottom 1. Docking connector Chapter One - 8...

  • Page 22: Ready For Use

    Getting Started Ready for Use After taking a quick look at your tablet computer, the following illustrations will get you ready for using it. 1. Mounting the Battery Mount the battery into the battery bay. Close the cover, turn clockwise and lock firmly with a flat-head screwdriver or a coin.
  • Page 23 Getting Started 3. Turning ON the Power Make sure the battery is securely mounted. Connect all power cords properly. Turn on the power of your tablet computer by pressing the “Power Button“. Press to turn on the power of your tablet computer. Note: ...

  • Page 24: Chapter2 - Operating Information

    Operating Information Chapter2 - Operating Information Start Using Your Tablet Computer Always turn on your tablet computer by using the power button. This is the standard operating procedure to start using your tablet computer. After turning on the power of your tablet computer, it will start with the Operating System (OS) installed.

  • Page 25: Stop Using Your Tablet Computer

    Operating Information Stop Using Your Tablet Computer Each time when you finish working with your tablet computer, there are several ways to stop your tablet computer from operating. Shut down Directly tap “Shut down” from your OS to turn OFF the power of your computer. Before shutting down, please do remember to save any unfinished works and close your applications to prevent your HDD/SSD from suffering possible data loss or damage.

  • Page 26: Working With Power Button (Heater Kit)

    Operating Information Working with Power Button (Heater Kit) Your tablet computer is equipped with a heater kit to enable work under low temperature. The heater will heat up the HDD to the temperature set by the user before booting the system. Also, the heater will constantly monitor HDD temperature. Once the temperature becomes lower, the heater will heat up again to maintain the temperature set by user.

  • Page 27: Installing Operating System

    Operating Information Installing Operating System Your computer is designed to operate with Microsoft Windows 7 or Windows 8 32 / 64-bit Operating System. Please connect your computer with an external USB-interface drive, such as an ODD or a USB thumb drive, and start the OS installation. Note: ...
  • Page 28 Operating Information Keyboard US International (UI) keyboard layout: British (GB) keyboard layout: Swedish (SV) keyboard layout: German (DE) keyboard layout: Russian (RU) keyboard layout: Chapter Two - 15...
  • Page 29 Operating Information To perform 2 layer combinational keystroke functions (keystroke functions printed in blue), press and hold the [Fn] key, and then press the corresponding key combinations. A list of useful combinational button functions is provided below for operational reference: Description [Fn] + [B]: Switches your tablet computer’s keyboard backlight on or off.

  • Page 30: Using Hard Disk Drive (Hdd) / Solid State Drive (Ssd)

    Operating Information APP1~APP3 & Input Lock Hotkey Description Increase brightness APP1 APP2 Decrease brightness APP3 LCD Backlight on/off Input Lock Input devices all off Using Hard Disk Drive (HDD) / Solid State Drive (SSD) Your tablet is equipped with 2.5” SATA II Hard Disk Drive (HDD) or Solid State Drive (SSD) for data storage.

  • Page 31: Using Expresscard

    Operating Information Using ExpressCard The computer supports 54mm and 34mm wide ExpressCard. You can install an ExpressCard while the computer is running. The computer automatically detects the card. To install an ExpressCard: - Hold the card with the top side of the card. - Slide the card into the slot until the card is completely seated in its connector.

  • Page 32: Using Sd Cards

    Operating Information Using SD Cards Your tablet computer is equipped with a SD card slot. The SD card slot supports SDHC, SDXC, UHS-1. To avoid damages caused by misinsertion, please insert your SD card into the card slot properly with the connectors facing down, as shown below. Chapter Two - 19...

  • Page 33: Intel ® Rapid Start Technology

    Operating Information ® Intel Rapid Start Technology ® Your tablet computer can operate Intel Rapid Start Technology when SSD is installed. This technology enables your system resume time not only to be as fast as wake-up time from S3 (Sleep) mode, but also to be more energy saving. Before using Intel Rapid Storage Technology, please check the following system requirements: System Requirement:...

  • Page 34: Using The Touch Screen

    Operating Information Using the Touch Screen Your tablet computer is equipped with a highly sensitive touch screen, allowing you to navigate on the touch screen easily without using other external devices. Before using the touch screen, please remember to install the driver first and then follow the instructions below to calibrate your stylus pen for a more precise positioning: 1.
  • Page 35 Operating Information Desired Operation Stylus Action Single Click Tap the touch screen once with your stylus pen. Double Click Quickly tap the touch screen twice with your stylus pen. To drag, tap and hold the object gently with your stylus pen. Without moving your stylus pen away from the touch screen, Drag and Drop move your stylus pen until you reach your destination.

  • Page 36: Operating Wireless Devices

    Operating Information Operating Wireless Devices For your ease of operations, you can turn on/off your wireless devices through the proprietary software application - “Device Power Manager”. Note:  Depending on the configuration of your tablet computer, your Device Power Manager menu may appear differently from the screenshots provided in this section.
  • Page 37 Operating Information Launch the Device Power Manager After launching the utility, please tap “Bluetooth” to enable the Bluetooth function (tap again to disable). Once the Bluetooth function starts up, the wireless LED indicator (color blue) will turn on and the Bluetooth icon will show up in the operating system accordingly.
  • Page 38 Operating Information Wireless LAN (Option) Wireless LAN is an optional wireless communication module for your tablet computer. An embedded antenna will be pre-installed in your tablet computer to access the internet wirelessly. To activate your Wireless LAN function, please follow the illustrations below: Driver &...
  • Page 39 Operating Information Wireless Wide Area Network (Option) Wireless Wide Area Network (WWAN) is an optional module for your tablet computer. With pre-installed embedded antenna and the optional WWAN module, your tablet computer will be able to engage in WWAN functions. Insert the SIM card Turn OFF your tablet computer.
  • Page 40 Operating Information Driver & Application Installation Please Install the WWAN driver first. For detailed instructions on installation procedures, please read from the Utility DVD and find the directory listed in the readme file. Follow the installation instructions to finish the driver installation. Install the Device Power Manager application.
  • Page 41 Operating Information 1. Tap the Options first, and a User Options window will pop up. 2. Tap Firmware 3. Drop down the Network Operator list and choose an appropriate operator. If your operator is not on the list, please choose Generic UMTS. 4.
  • Page 42 Operating Information GPS (Option) GPS is an optional module for your tablet computer. This GPS module supports both GPS and GLONASS systems. An embedded antenna is pre-installed in your tablet computer to support the functions of your GPS and GLONASS. Driver & Application Installation Install the Device Power Manager application: Read from the Utility DVD and find the directory listed in the readme file to finish installation.
  • Page 43 Operating Information Note:  Wireless devices can be turned ON/OFF through BIOS. Once a device is turned off through BIOS, its button on the Device Power Manager will be colored in yellow and with a prohibition marker. For example, the following illustration shows that WLAN, WWAN and GPS devices are disabled through BIOS.

  • Page 44: Using Invisible Mode (Option)

    Operating Information Using Invisible Mode (Option) Invisible Mode is an optional function which can quickly turn off all light sources, including LCD backlight, LED indicators and keyboard backlight. The Invisible Mode Switch is located at the upper right corner of the tablet computer, as the figure shows below.

  • Page 45: Using Docklight Dl10 (Option)

    Operating Information Using Docklight DL10 (Option) Docklight acts as docking unit or port enhancer. It contains more ports that are not available on system unit. Mount Docklight 1. Open the rubber cap on the docking connector. 2. Align the docking connector. 3.

  • Page 46: Chapter3- Managing Power

    Managing Power Chapter3- Managing Power AC Adapter The AC adapter performs two functions: It powers the computer from an external AC source. It charges the computer battery. The adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. The following are recommended when using the AC adapter: Use a properly grounded AC outlet.

  • Page 47: Battery

    Managing Power Battery The computer will automatically switch to battery when the external power source (AC adapter or optional vehicle adapter) is disconnected. Battery Power Saving Tips The computer comes with an intelligent power-saving feature. You may extend the battery life by: Setup power saving functions in Operating System Power Management options (e.g.
  • Page 48 Managing Power Battery Gauge You may check battery status from battery gauge. Click the power/battery icon to reveal the battery gauge window. The following is the illustration of Battery Gauge in Windows OS. Note:  Battery characteristic varies depending on factors such as ambient temperature, charging method, load current, aging, etc.

  • Page 49: Acpi Support

    Managing Power ACPI Support Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. With ACPI and an ACPI-compliant operating system (such as Microsoft Windows), this feature will allow you to reduce the power consumption and conserve energy. By supporting ACPI, the AC adapter LED and the Power indicator LED will show in different ways.

  • Page 50: Usb Fast Charging

    Managing Power USB Fast Charging Your tablet supports USB fast charging feature, enabling to quickly charge your fast-charging compatible devices. But note, fast charging is not supported in every power mode. The following table shows details for USB Charging information: Mode USB 2.0 Charging Features Fast charging supports Power off...

  • Page 51: Chapter 4 - Bios Setup

    Optional Devices BIOS Setup Chapter 4 - BIOS Setup Press [F2] at boot up to enter BIOS setup. Use arrow keys to select options and [+/-] to modify them. When finished, move to “Exit” and press [Enter] then confirm save by pressing [Y].

  • Page 52: Advanced Menu

    Optional Devices BIOS Setup Advanced Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Trusted Computing ► Trusted Computing Setting ► SATA Configuration ► Intel (R) Rapid Start Technology ► USB Configuration ► IT8783F Super IO Configuration : Select Screen →←...
  • Page 53 Optional Devices BIOS Setup Advanced Menu Selections You can make the following selections on the Advanced Menu. Feature Options Description Trusted Disabled TPM Support Computing Enabled SATA SATA Mode Selection SATA Mode Selection: IDE, AHCI, Configuration RAID Serial ATA Port 0 Software Preserve Intel (R) Rapid Disabled...

  • Page 54: Trusted Computing Sub-Menu

    Optional Devices BIOS Setup Trusted Computing Sub-Menu Aptio Setup Utility Advanced Enables or Disables Configuration BIOS support TPM SUPPORT [Disable] security device. O.S. will not show Security Current Status Information Device. SUPPORT TURNED OFF protocol INT1A interface will not be available. : Select Screen →←...

  • Page 55: Sata Configuration Sub-Menu

    Optional Devices BIOS Setup SATA Configuration Sub-Menu Aptio Setup Utility Advanced Determine how SATA SATA Mode Selection [AHCI] controller(s) operate. Serial ATA Port 0 Empty Software Preserve Unknown Serial ATA Port 1 Empty Software Preserve Unknown Serial ATA Port 2 SATA SSD (120.0 : Select Screen →←...

  • Page 56: Intel (R) Rapid Start Technology Sub-Menu

    Optional Devices BIOS Setup Intel (R) Rapid Start Technology Sub-Menu Aptio Setup Utility Advanced Enables or disable Intel Intel (R) Rapid Start Technology [Disabled] Rapid Start Technology : Select Screen →← ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 57: Usb Configuration Sub-Menu

    Optional Devices BIOS Setup USB Configuration Sub-Menu Aptio Setup Utility Advanced Enables Legacy USB Configuration support. AUTO option disables USB Devices: legacy support if no USB 1 point devices are connected. Disable option will keep Legacy USB Support [Enabled] USB devices available USB3.0 Support [Enabled] only for EFI applications...

  • Page 58: It8783F Super Io Configuration Sub-Menu

    Optional Devices BIOS Setup IT8783F Super IO Configuration Sub-Menu Aptio Setup Utility Advanced Set Parameters of Serial IT8783F Super IO configuration Port 0 (COMA) IT8783F Super IO Chip IT8783F ►Serial Port 0 Configuration : Select Screen →← ↑↓: Select Item Enter: Select –/+: Change Opt.

  • Page 59: Rf Device Control Configuration Sub-Menu

    Optional Devices BIOS Setup RF Device Control Configuration Sub-Menu Aptio Setup Utility Advanced RF Device Control Setting RF Device Control GSM STATUS Present [Enabled] GPS STATUS Present : Select Screen →← [Enabled] ↑↓: Select Item BT STATUS Present Enter: Select BLUETOOTH [Enabled] –/+: Change Opt.

  • Page 60: Ec Thermal Control Sub-Menu

    Optional Devices BIOS Setup EC Thermal Control Sub-Menu Aptio Setup Utility Advanced EC Thermal Control EC Thermal Control Setting Thermal cooling trip point [87 C] : Select Screen →← ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 61: Chipset Menu

    Optional Devices BIOS Setup Chipset Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit System Agent (SA) ► System Agent (SA) Configuration Parameters ► PCH-IO Configuration : Select Screen →← ↑↓: Select Item Enter: Select –/+: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults...
  • Page 62 Optional Devices BIOS Setup PCH-IO Configuration Sub-Menu Selections You can make the following selections on the PCH-IO Configuration sub-menu. Feature Options Description Disabled Enable or disable onboard NIC. Controller Enabled Wake on LAN Disabled Enable or disable integrated LAN to wake the system Enabled Disabled USB Configuration settings...

  • Page 63: Boot Menu

    Optional Devices BIOS Setup Boot Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Sets system boot Boot Option Priorities order Boot Option #1 [P2: SATA SSD...] Boot Option #2 [IBA GE Slot 00C8 v...] Network Device BBS Priorities : Select Screen →←...

  • Page 64: Security Menu

    Optional Devices BIOS Setup Security Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Administrator Password Description Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.

  • Page 65: Save & Exit Menu

    Optional Devices BIOS Setup Save & Exit Menu Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Exit system setup after Save Changes and Exit saving the changes Discard Changes and Exit Save Changes and Reset Discard Changes and Reset : Select Screen →←...

  • Page 66: Chapter 5 - Drivers And Applications

    Optional Devices Drivers and Applications Chapter 5 – Drivers and Applications The Utility DVD includes all the drivers for the installed devices in your tablet computer. Please consult the dealer if there is any driver missing. Also, through Device Manager in Windows, you are able to perform “Driver Update” or check if there are still drivers for the devices needed to be installed.

  • Page 67: Vga

    Optional Devices Drivers and Applications Windows 7/Ultimate 64-bit: Run "win64_15288.exe" in the directory of "\Drivers\Windows 7 (64-bit)\Intel_VGA", and then follow the instructions to install. Windows 7/Ultimate 32-bit: Run "win64_15288.exe" in the directory of "\Drivers\Windows 7 (32-bit)\Intel_VGA", and then follow the instructions to install. Windows 8/Ultimate 64-bit: Run "win64_152812.exe"...

  • Page 68: Intel Me

    Optional Devices Drivers and Applications Intel ME Windows 7/Ultimate 64-bit: Run "Setup.exe" in the directory of " \Drivers\Windows 7 (64-bit)\Intel_ME\ME_SW_7.1.85.1216", and then follow the instructions to install. Windows 7/Ultimate 32-bit: Run "Setup.exe" in the directory of "\Drivers\Windows 7 (32-bit)\Intel_ME\ME_SW_7.1.85.1216", and then follow the instructions to install. Windows 8/Ultimate 64-bit: Run "Setup.exe"...

  • Page 69: Wireless Power Manager

    Optional Devices Drivers and Applications Wireless Power Manager Windows 7/Ultimate 64-bit: Run "setup.exe" in the directory of "\Utilities\0107\", and then follow the instructions to install. Windows 7/Ultimate 32-bit: Run "setup.exe" in the directory of "\Utilities\0107\", and then follow the instructions to install. Windows 8/Ultimate 64-bit: Run "setup.exe"...

  • Page 70: Usb3.0

    Optional Devices Drivers and Applications USB3.0 Windows 7/Ultimate 64-bit: Run "Texas Instruments xHCI Driver v1.12.25 ( Multilanguaje - WHQL ).exe" in the directory of "\Drivers\Windows 7 (64-bit)\USB3.0\Texas Instruments xHCI Driver v1.12.25 ( Multilanguaje - WHQL )", and then follow the instructions to install. Windows 7/Ultimate 32-bit: Run "Texas Instruments xHCI Driver v1.12.25 ( Multilanguaje - WHQL ).exe"...

  • Page 71: Turbo Boost Monitor

    Optional Devices Drivers and Applications Turbo Boost Monitor Windows 7/Ultimate 64-bit: Run "setup.exe" in the directory of "\Drivers\Windows 7 (64-bit)\IntelR Turbo Boost Technology Monitor", and then follow the instructions to install. Windows 7/Ultimate 32-bit: Run "setup.exe" in the directory of "\Drivers\Windows 7 (32-bit)\IntelR Turbo Boost Technology Monitor", and then follow the instructions to install.

  • Page 72: Nd Gigabit Lan (Option )

    Optional Devices Drivers and Applications 2nd Gigabit LAN (Option) Windows 7/Ultimate 64-bit: Run "setup.exe" in the directory of "\Drivers\Windows 7 (64-bit)\RTL8111E\Install_Win7_7046_07202011", and then follow the instructions to install. Windows 7/Ultimate 32-bit: Run "setup.exe" in the directory of "\Drivers\Windows 7 (32-bit)\RTL8111E\Install_Win7_7046_07202011", and then follow the instructions to install.

  • Page 73: Wifi (Option)

    Optional Devices Drivers and Applications WiFi (Option) Windows 7/Ultimate 64-bit: Run "Wireless_15.3.1_Ds64.exe" in the directory of "\Drivers\Windows 7 (64-bit)\Intel_WiFi6235\WLAN\64bit", and then follow the instructions to install. *: Then into the“Wireless Power Manager”to turn on the WLAN device. Windows 7/Ultimate 32-bit: Run "Wireless_15.3.1_Ds32.exe" in the directory of "\Drivers\Windows 7 (32-bit)\Intel_WiFi6235\WLAN\32bit", and then follow the instructions to install.

  • Page 74: Gps (Option)

    Optional Devices Drivers and Applications GPS (Option) Windows 7/Ultimate 64-bit: GPS(u-blox): *: First into the "Wireless Power Manager" to turn on the GPS device. Run "ubloxGnss_sensor_windows_3264_v2.1.0.5.exe" in the directory of "\Drivers\Windows 7 (64-bit)\GPS(u-blox)", and then follow the instructions to install. Windows 7/Ultimate 32-bit: *: First into the "Wireless Power Manager"...

  • Page 75: Wwan (Option)

    Optional Devices Drivers and Applications WWAN (Option) Windows 7/Ultimate 64-bit: *: First into the“Wireless Power Manager”to turn on the WWAN device. Install Driver: Run "SWIGobi3kSetup.exe" in the directory of "\Drivers\Windows 7 (64-bit)\AirPrime MC8305 HSPA module (Gobi)\GenericGobi3k", and then follow the instructions to install. Install MC8305 module AP: "Watcher_Generic_Q.msi"...

  • Page 76: Tpm (Option)

    Optional Devices Drivers and Applications TPM (Option) Windows 7/Ultimate 64-bit: *: First into the "BIOS" to turn on the TPM device. Run "setup.exe" in the directory of "\Drivers\Windows 7 (64-bit)\TPM", and then follow the instructions to install. Windows 7/Ultimate 32-bit: *: First into the "BIOS" to turn on the TPM device. Run "setup.exe"...

  • Page 77: Chapter 6 - Specifications

    Specifications Chapter 6 – Specifications Platform Intel® Huron River Platform Intel® Sandy Bridge i7-2610UE 4 MB Intel Smart Cache Memory Intel® Cougar Point QM67 Memory Max. 8GB System Memory Industrial grade DDR3 SO-DIMM x 1, 1333MHz Touch Screen Type: 9” WXGA with LED B/L Resolution: 1280 x 768 pixels Brightness (min.~ typ.): 530~700 nits (min.~typ.)

  • Page 78: Audio

    Specifications Audio HD Audio and Stereo Speakers I/O Ports Serial port DB9 (Default RS232)  GLAN RJ45  Multi Bay:  ExpressCard slot (ExpressCard/54) x 1(Top) SIM Card slot x 1 + SD Card slot x 1(Bottom) Docking connector x 1 ...

  • Page 79: Dimensions And Weight

    Specifications Dimensions and Weight  Dimensions (mm): 9.8 x 7.5 x 1.5 inches (250 x 190 x 39 mm) (without Bumper) 10.2 x 7.8 x 1.9 inches (259 x 199 x 49.2 mm) (with Bumper) Weight: 1.9Kg (4.18 lb)  Note: ...
  • Page 80 Specifications Chapter Six - 67...

  • Page 81: Environmental, Safety & Emc

    Specifications Environmental, Safety & EMC CE, FCC, RoHS2.0, WEEE, REACH, IP54, MIL-STD-810G, MIL-STD-461F Operating & Storage Temperature Operating Temp.: I: 32°F~+104°F (0°C~+40°C) M: -4°F~+122°F (-20°C~+50°C) Optional: -22°F~+122°F (-30°C~+50°C) Storage Temp.: -40°F ~ +158°F (-40°C ~ +70°C) Materials and Recycling Materials of the computer are as follows: Cabinet: Magnesium alloy AZ91D UL grade PC+ABS GE C2800 or TN-3813BW...

  • Page 82: Chapter 7 - Optional Devices

    Optional Devices Chapter 7 – Optional Devices Communication WiFi/Bluetooth:  Intel® Centrino® Advanced-N 6235, Dual Band Board Form Factor: PCIe Half Mini Card Wi-Fi Certified: 802.11 a/b/g/n Bluetooth: Supports BT 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) Interface: PCIe (WiFi)/USB (BT) WWAN: Gobi 3000 (USB interface, Mini PCIe form factor) ...

  • Page 83: Docklight Dl10

    Optional Devices Docklight DL10 The Docklight can attach to computer for mobile or stationary operation. Ports: Serial x 2, USB2.0 x 4, RGB, Audio (speaker out, microphone in), DC jack, Optional Giga LAN RJ45 x 1 Dimensions: 9.8” (W) x 1.5” (D) x 2.4” (H) 250mm (W) x 37mm (D) x 61mm (H) Weight: 0.45Kg (1 lb.) approximately...

  • Page 84: External Usb Keyboard

    Optional Devices External USB Keyboard An optional 89-key external USB keyboard with LED backlight and IP rating of IP54 is available for your tablet computer. The detailed specification is provided below: 89-key layout emulates 101/102-key KB  Life: >1 million times, water/dust protection up to IP54 ...

  • Page 85: Mini Keyboard Kbd

    Optional Devices Mini Keyboard KBD Mini Keyboard KBD is designed for all models. KBD also brings convenience of use through multi-language keyboard versions and USB interface. The detailed specification is provided below: USB interface with 30 cm USB cable  66-Key design with function keys to simulate standard keyboards. ...

  • Page 86: Chapter 8 - Maintenance And Service

    Maintenance and Service Chapter 8 – Maintenance and Service Cleaning ALWAYS turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe.

  • Page 87: Rma Service

    Unless prior arrangements have been made, the customer is responsible for all shipping costs. Unauthorized use of the company’s shipping accounts is not permitted. If you require support please contact AMREL Service department: Phone: 800.882.6735 E-mail: cdinfo@amrel.com Chapter Eight - 74...

Table of Contents